With a goods receipt, you post delivered goods or a service rendered in the Scopevisio Client. This article shows how you record a goods receipt from the purchase order or directly, and how you post full deliveries, partial deliveries and backorders. Missing quantities, account assignment and the goods receipt with Scopevisio 2Go have their own articles (see below).
The article applies to users who post goods receipts in the Scopevisio Client. The goods receipt in the Scopevisio 2Go mobile app is described in the article Goods receipt via the API and with Scopevisio 2Go.
What a goods receipt does in Scopevisio
The goods receipt documents the physical arrival of ordered goods or the acceptance of a service rendered. It completes the ordering process on the delivery side and creates the basis for invoice verification:
Order → Delivery → Goods receipt → Stock increased
When you post the goods receipt, Scopevisio increases the stock and reduces the open order quantity. The document is then available in the invoice receipt book.
Prerequisites for posting a goods receipt
The supplier's delivery note number is available. It is a prerequisite for the automatic invoice allocation.
For the route via the order: The order has the status open.
For the order comparison: The order has the status open, so no goods receipt may yet be posted for this order.
Important: If the setting Delivery postings require full order matching is switched on, a goods receipt can only be posted if the entire quantity of each product item is assigned to order items (order comparison). A goods receipt without an order reference or with a quantity above the open order quantity can be saved but not posted. Partial deliveries remain allowed: the order itself does not have to be delivered in full. If the setting is switched off, Scopevisio posts an excess quantity without an order reference.
Two ways to the goods receipt in Scopevisio
Depending on the situation, there are two ways into the goods receipt:
From the order: You open the order and convert it into a delivery. Scopevisio automatically takes over all items, quantities and prices. This way is suitable for full deliveries where the supplier's delivery note matches the order.
Directly in the goods receipts overview: You open the goods receipts directly and enter products and quantities manually. You then use the Order comparison to assign the items to one or more orders. This way is suitable for partial deliveries, resolving backorders or deliveries that affect several orders.
Steps: Post a full delivery as a goods receipt
In the Scopevisio Client, open the order via the search fields.
Convert the order into a delivery via the corresponding action. Scopevisio automatically creates a goods receipt with all items of the order.
Check products and quantities against the supplier's delivery note.
Enter the supplier's delivery note number manually.
Enter the Posting date. As a rule, this is today's date.
Save the goods receipt.
Click Post.
After posting, the order disappears from the table of open orders and appears in the goods receipts overview. If it does not appear there, read the section "If a goods receipt does not work" further below.
The goods receipt form in Scopevisio with description of the delivery, posting date, items and the buttons Order comparison, Post and Save
Required fields in the goods receipt before posting
Before posting, fill in these fields in the goods receipt:
Delivery note number (delivery number): the number of the supplier's delivery note, entered manually. It is a prerequisite for the automated invoice allocation and for traceability in the invoice receipt book.
Posting date: as a rule, today's date
Steps: Post a partial delivery as a goods receipt
In a partial delivery, the quantity not delivered remains on the order as a remaining quantity. You have two options.
Partial delivery by items:
Convert the order into a delivery.
Save the process.
Remove the items that were not delivered. These remain on the order as a remaining quantity.
Partial delivery by quantities:
Convert the order into a delivery.
Save the process.
Adjust the quantities to the quantities actually delivered. The difference remains on the order as an open remaining quantity.
Steps: Post a delivery with backorders or several orders
If a delivery combines backorders from several orders or cannot be clearly assigned to a single order, start directly in the goods receipts overview.
In the goods receipts overview, click Add.
Enter the products and quantities as the supplier has documented them.
Assign each item to the corresponding order via the Order comparison.
After the order comparison is complete, return to the goods receipt.
Click Post.
For the order comparison, there are two types of allocation:
Automatic allocation: Scopevisio assigns the item to the oldest open order quantity for this product.
Manual allocation: If the automatic allocation does not fit, select a different order from the overview that still carries the product with an open quantity.
You can fully check and correct the allocation in the order comparison before saving.
The order comparison in Scopevisio: matched orders at the top, below them the matched order items with assigned quantity
Important: The order comparison is only possible for orders with the status open. So no goods receipt may yet be posted for the referenced order. If the setting Delivery postings require full order matching is switched on, the order comparison must also cover the entire quantity of each product item so that the goods receipt can be posted.
More topics around the goods receipt
Missing quantity and underdelivery: You record missing quantities as a return. More in the article Post a missing quantity or underdelivery in the goods receipt.
Account assignment, delivery note and incoming invoice: More in the article Goods receipt: account assignment and allocation of delivery note and incoming invoice.
API and Scopevisio 2Go: More in the article Goods receipt via the API and with Scopevisio 2Go.
If a goods receipt does not work
The following table shows typical problems with the goods receipt in the Scopevisio Client and what you check in each case. Problems in Scopevisio 2Go are described in the article Goods receipt via the API and with Scopevisio 2Go.
Problem | Solution |
Order is not displayed | Check the status of the order. Only orders with the status open appear. |
Goods receipt can be saved but not posted | Check whether the setting Delivery postings require full order matching is switched on. Then the entire quantity of each product item must be assigned to order items. A goods receipt without an order reference or with a quantity above the open order quantity cannot be posted. |
Goods receipt cannot be posted although the order comparison is complete | Check the network connection and whether all required fields are filled in. |
If the problem persists, ask in the chat for a handover to the support team.
Frequently asked questions about goods receipts
What is the difference between goods receipt and incoming invoice?
The goods receipt records the physical delivery, the incoming invoice records the supplier's invoice. The following table compares both documents in Scopevisio:
Aspect | Goods receipt | Incoming invoice |
What is recorded? | The physical delivery of the goods or acceptance of a service/right | The supplier's invoice |
Legal significance | Transfer of possession/ownership | Documentation of the claim |
Accounting effect | Increases the stock, reduces the open quantity in the order (quantity posting) | Records the liability (value posting) |
Due date | – | Triggers the payment term |
Time | On acceptance of goods | On receipt of invoice |
Basis | Order + delivery note | Supplier's invoice |
Verification | Does the delivery match the order? Are the quantities covered by the order? | Does the invoice match order and delivery? Are unit price and quantity correct? |
The three documents order (What was ordered?), goods receipt (What was delivered?) and incoming invoice (What is being charged?) can be checked for consistency (3-way matching).


