With Scopevisio Procurement, you assign incoming invoices in the invoice receipt book (REBU) to goods receipts and thereby automate invoice verification. You find the invoice receipt book in the Scopevisio Client in the ribbon under Procurement → Invoice receipt book.
The article applies to users who process incoming invoices in the Scopevisio Client. The invoice receipt book is an add-on. You find its settings under Einstellungen → Funktionsbereiche → Organization → Rechnungseingangsbuch (Add-on) → Allgemein.
Why you assign incoming invoices to goods receipts
The assignment completes the three-document cycle in the procurement process. The following table shows which question each document answers:
Document | Question |
Order | What was ordered at what price? |
Goods receipt | What was actually delivered? |
Incoming invoice | What is being charged? |
If the net totals from goods receipt and invoice match, the factual check is done, without manual line checks and without queries to the orderer. Prices and quantities have already been checked at order and goods receipt. The incoming invoice is the last comparison in the chain, not the first.
Prerequisites for assigning incoming invoices in Scopevisio
The goods receipt is posted, or it will be posted later. Scopevisio then assigns the invoice automatically when it is posted, provided that the prerequisites for the automatic assignment are met.
For the automatic assignment: Supplier and delivery note number were recognised when the invoice was recorded.
The supplier's delivery note number was recorded at the goods receipt.
Steps: Assign an incoming invoice to a goods receipt manually
In the Scopevisio Client, open the incoming invoice in the ribbon under Procurement → Invoice receipt book.
In the Received delivery notes (procurement) field, select the action Assign. Scopevisio shows all documented deliveries for this supplier.
Select the matching goods receipt. Scopevisio links the invoice with the goods receipt number, shipment number and delivery note number.
You can fully check and correct the assignment before saving. In the Received delivery notes (procurement) field, you then see the linked goods receipts.
The invoice receipt book in Scopevisio with the list of incoming invoices and the buttons Add, Capture, Release, Account and Transfer
An incoming invoice in Scopevisio with the procurement area: delivery note number, goods receipts and delivery note assignment
The invoice comparison in Scopevisio: invoice data, received goods receipts with total net amount and the associated items
Assign an incoming invoice when the delivery note number is missing
If no delivery note number was recorded at the goods receipt, or if Scopevisio does not recognise the number on the invoice, the automatic assignment does not apply. In that case, you assign the invoice manually.
In the assignment field, this information is visible to identify the right goods receipt:
Order number
Ordinal number of the goods receipt posting
Amount check
Quantities and products
Using these fields, the matching goods receipt can be clearly assigned even without a delivery note number.
Tip: Clarify with the supplier that the delivery note number is shown both on the delivery note and on the invoice. This is the basic prerequisite for a consistently automated assignment. In addition, always record the supplier's delivery note number correctly when posting the goods receipt. If it is missing or wrong, Scopevisio cannot assign the invoice automatically, the assignment has to be done manually, and the time advantage of automation is lost.
Assign incoming invoices automatically in Scopevisio
Scopevisio can make the assignment without a manual click on Assign. The prerequisite is that supplier and delivery note number are recognised when the invoice is recorded.
Incoming invoice arrives after the goods receipt
If the associated goods receipt is already posted when the incoming invoice arrives, a rule can make the assignment fully automatically. If supplier and delivery note number are available, Scopevisio checks at invoice upload whether a matching posted goods receipt exists and creates the link automatically.
To set up the rule for the automatic goods receipt assignment:
In the ribbon, open Stammdaten Beschaffung → Einstellungen.
In the rule editor, create a new rule. Two text operators are available:
Check whether the document text contains a known delivery number or return number
Check against the document number
Store Automatische Wareneingangszuordnung as the action.
The rule Zuordnung Wareneingang in Scopevisio as an example: condition text contains known delivery note number, action Automatische Wareneingangszuordnung
Incoming invoice arrives before the goods receipt
In practice, the invoice often arrives before the goods: the supplier sends the invoice electronically while the shipment is still in transit.
The incoming invoice is recorded. The goods receipt is still missing.
The goods arrive, and you post the goods receipt.
Scopevisio automatically assigns the incoming invoice to the goods receipt at this point.
The assignment takes place at the earliest possible time, as soon as the goods receipt is posted. The manual click on Assign is not needed.
Settings for deliveries and invoice verification in the invoice receipt book
You define the settings for the assignment and verification of incoming invoices under Einstellungen → Funktionsbereiche → Organization → Rechnungseingangsbuch (Add-on) → Allgemein. They are in the form Einstellungen Rechnungseingang in the card Weitere Einstellungen:
Lieferungen (Beschaffung) nutzen: Ja or Nein
Zuordnung von Lieferungen: Verifizieren immer möglich, Vollzuordnung nötig or Teilzuordnung nötig
Abweichung (Rechnungsprüfung): Verifizieren immer möglich, Prüfung bedingt erfüllt, Keine Abweichung, Absolut or Prozentual
For Absolut and Prozentual, you also enter the amount or the percentage value in the associated field.
Release or check incoming invoices automatically in Scopevisio
The factual check of an incoming invoice means: a second person manually compares order, delivery note and invoice and decides whether quantities and amounts match. This takes time and ties up someone who cannot do anything else in the meantime.
The incoming invoice form shows both net values directly next to each other: the summed net amount of all assigned goods receipts and the net amount of the invoice. A rule can turn this into an automatic decision: if the deviation between the two values is within a defined tolerance, Scopevisio automatically releases the invoice or marks it as factually checked, depending on the rule configuration. Only invoices outside the tolerance still end up in manual verification.
Define the tolerance for deviations in invoice verification
With the setting Abweichung (Rechnungsprüfung), you define up to which difference between the ordered or, via goods receipt, posted amount and the charged amount is still tolerated in the comparison. The setting has a global effect: it applies to all incoming invoices to which no different rule applies. The location of the setting is described in the section "Settings for deliveries and invoice verification in the invoice receipt book".
These options are available for the tolerance:
Keine Abweichung: Any difference triggers a mandatory manual check.
Absolut: Deviations up to the entered amount in euros are considered tolerable.
Prozentual: Deviations up to the entered percentage value are considered tolerable.
Type and value are configured together: first select the tolerance type and then enter the value in the associated field.
When Scopevisio checks the deviation: at verification
The comparison takes place at the time of verification of the incoming invoice, that is, when the invoice is assigned to a goods receipt (automatically or controlled by rule). In the Scopevisio Client, the buttons for this are Verifizierung and Verifizierung & Nächster.
If the deviation is within the tolerance, the configured follow-up rule applies.
If it is outside, the invoice remains in manual verification.
Steps: Set up a tolerance rule in the rule editor
In the rule editor, you can configure rules that determine what happens automatically when the tolerance is met. You can filter rules by these criteria:
Supplier
Invoice type
Document text
For each rule, you define one of these actions:
Sachlich prüfen: The tolerance check is considered passed, the factual check is still carried out.
Freigeben: The invoice is released automatically, a manual factual check is not needed.
To set up the rule:
Open the rule editor of the invoice receipt book.
Create a new rule.
As Anwendungszeitpunkt, select the entry Bei Verifizierung.
As Aktion, select one of the following options and enter the permitted value:
Automatische sachliche Prüfung
Automatische sachliche Freigabe
If the deviation between invoice amount and goods receipt value at assignment is within this value, Scopevisio automatically verifies the invoice according to your other current configuration.
Assign several goods receipts to one incoming invoice
If you assign several goods receipts to one invoice, Scopevisio automatically totals the individual items and compares the total with the net invoice value.
Tip: Define an internal tolerance limit for acceptable deviations in the low range, for example for rounding differences at decimal place level. This way, you avoid manual intervention for system-related minimal deviations.
Returns in the assignment of incoming invoices
Returns, that is, goods receipts that went back to the supplier, appear in the assignment overview marked as such. This enables clear company-internal communication about existing returns and the derivation of the necessary next steps.
A return does not change the incoming invoice. Through the return, Scopevisio neither automatically creates a credit note or debit note, nor does it block the invoice. The return only posts the stock back. Invoice verification compares the net amount of the invoice with the sum of the assigned goods receipts (within the tolerance rule). Depending on the industry and supplier, the following next steps are usual:
A debit note that is deducted directly when the invoice is issued
A formal request to issue a credit note
The document to the supplier in Scopevisio is always the return. Details are described in the article Returns.
Automatic account assignment for incoming invoices in Scopevisio
Scopevisio assigns the accounts automatically via the product groups of the products. The posting, and thus the differentiation of the products, is made via structural master data, that is, consistently, automatically and at the moment of goods receipt.
You can post the incoming invoice to one account. No manual breakdown is needed. The reason for this lies not in the invoice, but in the upstream process: the posting account for product, unit and price (and possibly the originating cost center) are already known at the moment the requirement is triggered, not only when the invoice arrives.
Process when posting a goods receipt:
The goods receipt is posted.
Scopevisio reads the product group of each item.
The product group contains the stored stock account and stock change account.
Scopevisio posts automatically to the correct account, at the stock price according to the stored valuation method.
Optionally, you can use a rule to first post all incoming invoices to a single clearing account. Likewise, you can first post all goods receipts to a central clearing account. The split to the correct stock accounts then takes place on the system side via the stored product groups, so that it can be evaluated and documented.
Assignment to cost centers in Scopevisio
Whether a requirement is triggered via a requirement request or a customer order: the mechanism is identical.
The cost center does not come from a manually maintained field on the incoming invoice document. It results from the organization structure stored in the master data, namely from the unit that triggered the requirement (order, requirement request, etc.). This is not an entry that someone has to make. It is a structural derivation that Scopevisio carries out automatically and sets as a journal entry.
This only happens at the moment the actual consumption takes place (withdrawal from stock, quantity correction in inventories, outflow via a third-party system) and when the posting is economically correct. Not earlier, not later. When the supplier invoice arrives, there is no longer an open question about the assignment: cost center and account are already available.
Control the payment release for incoming invoices
You decide how far you extend the automation. The following table shows the two options for the payment release:
Option | Description |
Vollautomatisch | Clearing takes place with the next payment run |
Manuell | Payment release required before clearing |
This allows you to adapt the process to your internal approval guidelines.
Overview of open assignments of incoming invoices
In the Scopevisio Client, open the ribbon Procurement → Orders. The order overview shows the status of each order without you having to switch to the invoice receipt book:
Which orders have a posted goods receipt?
Which goods receipts already have an invoice assigned?
Which assignments are still missing?
You see at a glance where action is needed.
The end-to-end procurement process up to payment
The following table shows the five steps from the order document to payment and what is checked in each case:
Step | Document | Check |
1 | Order | Prices and quantities defined |
2 | Order confirmation | Supplier confirms conditions |
3 | Goods receipt | Delivery checked, delivery note number recorded |
4 | Incoming invoice | Automatic assignment via delivery note number |
5 | Payment | Automatically or after manual release |
The congruence of the net totals from order, order confirmation, goods receipt and invoice ensures a consistently consistent process.
Frequently asked questions about incoming invoices
What does verification mean for incoming invoices?
Verification is the point at which Scopevisio checks the incoming invoice against the assigned goods receipts. In the Scopevisio Client, the buttons are Verifizierung and Verifizierung & Nächster.
Does a return change the incoming invoice?
No, a return does not change the incoming invoice in Scopevisio. The return only posts the stock back.
Is there a dispute case for incoming invoices in Scopevisio?
No, there is no dispute case in Scopevisio. Invoice verification compares the net amount of the invoice with the sum of the assigned goods receipts (within the tolerance rule).

