Skip to main content

Inventory

Create, count and post an inventory in Scopevisio: process, status, blind inventory, postponed inventory, location and initial inventory.

With the inventory module in the Scopevisio Client, you carry out a complete or location-based stocktaking: you create the inventory, count, complete the count and post the differences. You find the module in the ribbon under Procurement → Inventory.

Scopevisio compares the calculated stock with the counted stock and posts differences directly to the product. The module covers the regular key date inventory, the postponed inventory during ongoing operations and the initial inventory when the system is put into operation. This article applies to users who carry out inventories in the Scopevisio Client or in the mobile app Scopevisio 2Go.

Steps: Create, count and post an inventory in Scopevisio

In Scopevisio, an inventory goes through the statuses In preparation, Started, Durchgeführt and Gebucht. The following steps describe the process in the Scopevisio Client:

  1. In the ribbon, open Procurement → Inventory. Scopevisio shows the overview of all created inventories.

  2. Click Create to create a new inventory. The inventory has the status In preparation. To continue an existing inventory that has already been started, select Edit.

  3. Set a Document date and a Plan date for the inventory documents.

  4. Enter the Location and, if needed, restrict it to a Lagerbereich.

  5. If needed, specify whether the calculated quantities are hidden from the counters (option Berechnete Mengen ausblenden, see section "Blind inventory"). This is only possible as long as the inventory has not been started.

  6. In the card of the items, click Einträge erstellen. Scopevisio creates the entries from the calculated stock of the location or of the Lagerbereich. With Einträge entfernen you remove selected entries again.

  7. Click Start. Scopevisio fixes the entries, and the inventory has the status Started.

  8. Record the counted quantities. You add further entries with Eintrag hinzufügen or by file upload.

  9. Click Abschließen. Scopevisio ends the count, and the inventory has the status Durchgeführt. With Erneut bearbeiten you return to the count.

  10. Click Differenzen buchen. Scopevisio posts the stock differences, and the inventory has the status Gebucht.

Inventory in status In preparation with location, document and plan date and items

The image shows the inventory in Scopevisio in status In preparation: at the top the inventory details with location, document and plan date, below the items with calculated quantity

Important: Scopevisio only posts items with a difference. An inventory without differences cannot be posted.

Scopevisio values the differences at the stock price. The posting of the differences can be carried out organizationally by a different person or department than the count, for example to separate recording and posting.

Tip: Define the inventory period at the beginning to ensure transparent and traceable documentation.

Status of an inventory in Scopevisio

After opening the Inventory menu item, you see an overview of all created inventories. Each inventory has one of the following statuses:

  • In preparation: The inventory has been created but not yet started.

  • Started: The inventory is in the counting phase.

  • Durchgeführt: The count is completed. With Erneut bearbeiten you return to the count.

  • Gebucht: The stock differences are posted.

Each inventory automatically receives a unique inventory ID. You can use it to trace

  • on which day the inventory was carried out,

  • which stocks were recorded,

  • and which status currently applies.

Reverse an inventory: cancel a posted inventory

With Reverse you cancel a posted inventory again by means of correction postings.

When inventory postings arrive in financial accounting

The Differenzen buchen function posts the stock differences in procurement. The postings reach financial accounting via Procurement → Postings → Posting runs. Only there do you post the inventory postings to financial accounting.

Which account Scopevisio posts for inventory differences

For inventory issues (counted quantity lower than the stock), Scopevisio posts to the expense account if the rule list of the product group contains an entry with the account type Aufwand Konto and the booking type Post outgoing journal entry. If this entry is missing, Scopevisio posts the issue against the stock change account. For inventory receipts, Scopevisio never uses the expense account. The configuration is described in the article "Product groups, valuation methods, stock accounts".

Types of inventory in Scopevisio

Key date inventory in Scopevisio

In a key date inventory, you record all stocks on a defined key date. As a rule, this is the current working date, but you can change the key date manually, also to the past. Scopevisio always calculates the target stock as of the selected key date, the difference posting is made on this date, and all later goods movements build on this (corrected) stock.

With backdating, you map a postponed inventory in accordance with the German Commercial Code (HGB): you count on the key date and record the results in the system only days later. Note two points:

  • The recorded counted quantities must correspond to the stock on the selected key date. If you only counted after the key date and there were goods movements in the meantime, calculate the count result back to the key date yourself before recording it.

  • Posting to accounting periods that have already been closed is not possible.

The key date inventory is suitable if you need a complete, documented stock snapshot on a fixed date, typically at the end of the financial year.

Postponed inventory in Scopevisio

In a postponed inventory, you do not count on a single day, but over several days or weeks. Each item has its own recording date. Scopevisio calculates the target stock per item as of this date and posts the difference on this date. You can therefore count part of the range today and the next part tomorrow, each against the system stock valid at that time. Goods receipts and goods issues in the meantime do not distort the result, because each count is checked against the target of its own recording date.

This is how the recording date of an item is set:

  • Scopevisio sets it automatically as soon as you enter the counted quantity, in the client or in the Scopevisio 2Go app.

  • You can change it manually or provide it via import.

  • It must not be earlier than the document date.

A prerequisite for correct results is that you post goods movements promptly. If goods are physically in the warehouse but their goods receipt has not yet been posted, an apparent difference arises.

The postponed inventory is suitable if operations continue during the inventory and the range is too large to count on one day. In the settings, you specify which inventory type is suggested for new inventories.

Initial inventory in Scopevisio

The initial inventory is the one-off recording of the opening stock when the system is put into operation. You create the initial inventory like a key date inventory. The process is described in the section "Steps: Carry out an initial inventory in Scopevisio" further below. It is suitable at system start or when taking over stocks from a legacy system.

Inventory options in Scopevisio

Blind inventory: hide calculated quantities

The blind inventory is called Berechnete Mengen ausblenden in the Scopevisio Client (in the overview as the column Bestand ausblenden). You can combine it with the inventory types. This ensures that the count is not influenced by the system stock, which is relevant for audit requirements, for example.

  • If the option is on, Scopevisio hides the calculated quantity and the difference during the count. The counted quantities start at 0.

  • If the option is off, the counted quantity is pre-filled with the calculated stock.

You can only change the option as long as the inventory has not been started, that is, before Start. The default value for new inventories is set by the setting of the same name, Berechnete Mengen ausblenden, in the procurement settings.

The disadvantage of the blind inventory: without the calculated quantity as a plausibility anchor, the likelihood of counting errors increases, especially for large ranges.

Include products without stock in the inventory

You specify whether the inventory only includes products with stock that has already been posted or also includes items without previous stock. The latter is particularly relevant for the initial inventory, so that all created products appear in the count list. The option is called Produkte ohne Bestand anzeigen.

Location and storage area of an inventory in Scopevisio

In Scopevisio, an inventory is always carried out for exactly one location. Within the location, you can additionally restrict the inventory to one Lagerbereich. Scopevisio then counts all storing places in this Lagerbereich. Without a restriction, the inventory covers the whole location.

A prerequisite for restricting to a Lagerbereich is that your products are assigned to storing places and that these storing places have been organised into a Lagerbereich.

Note: An inventory across several locations does not exist. Create a separate inventory for each location.

Export an inventory and record it externally

You can export the inventory as a CSV file, record the counted quantities in Excel and then transfer the results into the inventory by file upload. This allows counting teams without system access to take part, and you ensure that consistent data is read and written everywhere.

Valuation of inventory differences in Scopevisio

Each product carries a stock price according to the valuation method stored on the product, the incoming goods movements or an entry in the product supplier. For the valuation of inventory differences, the stock price according to the stored valuation method always applies.

For backdated inventory postings, Scopevisio does not recalculate the moving average price retroactively. In parallel, Scopevisio maintains an average price that minimises the effects of subsequent corrections. The two values can therefore differ from each other. In every case, the stored valuation method remains decisive for the valuation.

Only for the initial inventory can the stock price exceptionally be set manually.

Steps: Carry out an initial inventory in Scopevisio

You create the first inventory in Scopevisio in the same way as a key date inventory. The difference: as a rule, all required products have already been created but show a stock of 0.

  1. Activate the option Produkte ohne Bestand anzeigen so that all products from the product overview are included in the inventory.

  2. Export these rows and reproduce the recording of the stocks in Excel, including the stock price at which they are to be valued. Organizationally, this procedure is advisable.

You can set the stock price for the initial inventory of a product in two ways:

  • via the entry in the product supplier

  • directly with the posting of the inventory

Carry out an inventory with Scopevisio 2Go

With the mobile app Scopevisio 2Go, you record the products and quantities actually present directly at the storing place.

  1. Create the inventory in the Scopevisio Client and click Start.

  2. Open the inventory in Scopevisio 2Go. It appears there under its sequence number.

  3. Count and save quantities as in the Scopevisio Client.

In Scopevisio 2Go, you can also identify products unambiguously by barcode scan: via the camera of a mobile phone or tablet or via the laser scanner of an MDE device. Counters therefore do not need any product knowledge to tell one product from another. Direct recording in the system prevents incomplete or lost count lists on paper. Scopevisio sets the recording date automatically as soon as the counted quantity is entered. In the postponed inventory, this is the basis for the correct target-actual comparison.

Inventory in practice: use cases

Annual inventory at the end of the financial year

You count the entire stock of a location on 31 December. Recording in the system only takes place in the first week of January: you create a key date inventory, set the key date back to 31 December and record the count results. The target calculation and the difference posting refer to 31 December. The goods receipts from January build cleanly on the corrected stock.

Inventory during ongoing operations

Your warehouse has several thousand products, and shipping cannot pause for a complete count. You use the postponed inventory: the counting team works through the range over two weeks, storage area by storage area, records with the Scopevisio 2Go app by barcode scan, and each item is checked against the target stock of its recording date. Goods receipts and deliveries continue as normal in the meantime.

System start with stock takeover

You put Scopevisio into operation, the products have been created, all stocks are at 0. You create an initial inventory with the option Produkte ohne Bestand anzeigen, export the count list as CSV, record stocks and stock prices from the legacy system in Excel and take over the values. You set the stock prices exceptionally manually or via the product supplier.

Partial inventory after conspicuous differences

In a storage area, shortages accumulate during picking. You create an inventory for the location, restrict it to the affected storage area and count only this section, without touching the rest of the location.

Uninfluenced count for the audit

Your audit requires that counters do not know the system stock. You activate the option Berechnete Mengen ausblenden (blind inventory): the calculated quantities are hidden in the count list and in the app. In addition, you separate counting and posting organizationally: one person counts, another checks the differences and posts.

When an inventory cannot be edited as expected

The following cases occur in the inventory process in Scopevisio:

  • Differenzen buchen is not possible: The cause is that the inventory contains no differences. Scopevisio only posts items with a difference. Check the counted quantities. If there is really no difference, no posting is needed.

  • The option Berechnete Mengen ausblenden cannot be changed: The cause is that the inventory has already been started. You can only change the option before Start.

  • A recording date is not accepted: The recording date of an item must not be earlier than the document date. Correct the date.

  • The count is to continue after Abschließen: Click Erneut bearbeiten.

If the problem persists, ask in the chat for a handover to the support team.

Frequently asked questions about inventory

How do I reverse a posted inventory?

With the Reverse function, you cancel a posted inventory in Scopevisio again by means of correction postings.

Can I create an inventory across several locations?

No, an inventory in Scopevisio always applies to exactly one location. Within the location, you can restrict it to one Lagerbereich.

Where do I find the functions Add entries and Begin inventory?

Functions with these names do not exist in Scopevisio. You start the inventory with Start, and you create the entries in the card of the items with Einträge erstellen. During the count, you add further entries with Eintrag hinzufügen.

Related articles about inventory

Did this answer your question?