Skip to main content

Goods receipts

Post goods receipts in Scopevisio: full and partial deliveries, order comparison, missing quantities, account assignment and invoice allocation.

With a goods receipt, you post delivered goods or a service rendered in the Scopevisio Client. This article shows how you record a goods receipt from the purchase order or directly, how you post full deliveries, partial deliveries, backorders and missing quantities, and how the account assignment works.

The article applies to users who post goods receipts in the Scopevisio Client. The goods receipt in the Scopevisio 2Go mobile app is described in the section "Post a goods receipt with Scopevisio 2Go".

What a goods receipt does in Scopevisio

The goods receipt documents the physical arrival of ordered goods or the acceptance of a service rendered. It completes the ordering process on the delivery side and creates the basis for invoice verification:

Order → Delivery → Goods receipt → Stock increased

When you post the goods receipt, Scopevisio increases the stock and reduces the open order quantity. The document is then available in the invoice receipt book.

Prerequisites for posting a goods receipt

  • The supplier's delivery note number is available. It is a prerequisite for the automatic invoice allocation.

  • For the route via the order: The order has the status open.

  • For the order comparison: The order has the status open, so no goods receipt may yet be posted for this order.

Important: If the setting Delivery postings require full order matching is switched on, a goods receipt can only be posted if the entire quantity of each product item is assigned to order items (order comparison). A goods receipt without an order reference or with a quantity above the open order quantity can be saved but not posted. Partial deliveries remain allowed: the order itself does not have to be delivered in full. If the setting is switched off, Scopevisio posts an excess quantity without an order reference.

Two ways to the goods receipt in Scopevisio

Depending on the situation, there are two ways into the goods receipt:

  • From the order: You open the order and convert it into a delivery. Scopevisio automatically takes over all items, quantities and prices. This way is suitable for full deliveries where the supplier's delivery note matches the order.

  • Directly in the goods receipts overview: You open the goods receipts directly and enter products and quantities manually. You then use the Order comparison to assign the items to one or more orders. This way is suitable for partial deliveries, resolving backorders or deliveries that affect several orders.

Steps: Post a full delivery as a goods receipt

  1. In the Scopevisio Client, open the order via the search fields.

  2. Convert the order into a delivery via the corresponding action. Scopevisio automatically creates a goods receipt with all items of the order.

  3. Check products and quantities against the supplier's delivery note.

  4. Enter the supplier's delivery note number manually.

  5. Enter the Posting date. As a rule, this is today's date.

  6. Save the goods receipt.

  7. Click Post.

After posting, the order disappears from the table of open orders and appears in the goods receipts overview. If it does not appear there, read the section "If a goods receipt does not work" further below.

The goods receipt form in Scopevisio with description of the delivery, posting date, items and the buttons Order comparison, Post and Save

The goods receipt form in Scopevisio with description of the delivery, posting date, items and the buttons Order comparison, Post and Save

Required fields in the goods receipt before posting

Before posting, fill in these fields in the goods receipt:

  • Delivery note number (delivery number): the number of the supplier's delivery note, entered manually. It is a prerequisite for the automated invoice allocation and for traceability in the invoice receipt book.

  • Posting date: as a rule, today's date

Steps: Post a partial delivery as a goods receipt

In a partial delivery, the quantity not delivered remains on the order as a remaining quantity. You have two options.

Partial delivery by items:

  1. Convert the order into a delivery.

  2. Save the process.

  3. Remove the items that were not delivered. These remain on the order as a remaining quantity.

Partial delivery by quantities:

  1. Convert the order into a delivery.

  2. Save the process.

  3. Adjust the quantities to the quantities actually delivered. The difference remains on the order as an open remaining quantity.

Steps: Post a delivery with backorders or several orders

If a delivery combines backorders from several orders or cannot be clearly assigned to a single order, start directly in the goods receipts overview.

  1. In the goods receipts overview, click Add.

  2. Enter the products and quantities as the supplier has documented them.

  3. Assign each item to the corresponding order via the Order comparison.

  4. After the order comparison is complete, return to the goods receipt.

  5. Click Post.

For the order comparison, there are two types of allocation:

  • Automatic allocation: Scopevisio assigns the item to the oldest open order quantity for this product.

  • Manual allocation: If the automatic allocation does not fit, select a different order from the overview that still carries the product with an open quantity.

You can fully check and correct the allocation in the order comparison before saving.

The order comparison in Scopevisio: matched orders at the top, below them the matched order items with assigned quantity

The order comparison in Scopevisio: matched orders at the top, below them the matched order items with assigned quantity

Important: The order comparison is only possible for orders with the status open. So no goods receipt may yet be posted for the referenced order. If the setting Delivery postings require full order matching is switched on, the order comparison must also cover the entire quantity of each product item so that the goods receipt can be posted.

Post an underdelivery or missing quantity in the goods receipt

If less goods arrive than the delivery note shows, record the goods receipt with the delivery note quantity and create a return for the missing quantity. An underdelivery exists if the quantity actually delivered differs from the quantity documented on the delivery note.

Example: The delivery note shows 22 pieces, 19 pieces have arrived. The missing quantity is 3 pieces.

Recommended procedure:

  1. Enter the goods receipt with 22 pieces (according to the delivery note).

  2. Then generate a return for the 3 missing pieces back to the supplier.

The return documents the deviation, and a corresponding line entry appears in the invoice receipt book. The individual steps of the return are described in the article Returns.

What the return does for a missing quantity in Scopevisio

In Scopevisio, the return only posts the stock back. It does not change the incoming invoice: Scopevisio neither automatically creates a credit note or debit note, nor does it block the invoice. Invoice verification compares the net amount of the invoice with the sum of the assigned goods receipts (within the tolerance rule).

Why you record a missing quantity as a return

The return documents the time, quantity and delivery assignment of the missing quantity and can be sent directly to the supplier. There are three reasons for this:

  • Duty to give notice of defects: Under §377 HGB, there is a statutory duty to inspect and give notice of defects. Missing quantities must be reported to the supplier without delay after they are found. Anyone who does not complain in time loses their claims to subsequent delivery, price reduction or damages.

  • Evaluable supplier history: Missing quantities that you systematically record as a return can be evaluated, for example: Which supplier delivers with missing quantities how often? This information only arises via the return, not via open order remaining quantities.

  • Open order quantities: If Scopevisio only posts the quantity actually received, the order remains open with a remaining quantity. Internally, this means "outstanding delivery", not "reported missing quantity". Open order remaining quantities do not generate an order proposal because Scopevisio assumes that the quantity is still arriving. The 3 pieces missing in the example are therefore not reordered, although they will never be delivered.

Document to the supplier for a missing quantity

In the case of a missing quantity, no physical return takes place. The function is the same (return). You can name the document to the supplier appropriately depending on the occasion, for example as a credit note request or debit note.

Account assignment for the goods receipt in Scopevisio

Scopevisio automatically assigns the accounts at goods receipt via the product group of the respective product. Scopevisio takes over the stock account and stock change account stored on the product group when posting, without manual intervention.

Process when posting a goods receipt:

  1. You post the goods receipt.

  2. Scopevisio reads the product group of each item.

  3. The product group contains the stored stock account and stock change account.

  4. Scopevisio posts automatically to these accounts.

You do not have to manually read, interpret, split and assign accounts to invoice items. The product group on the product controls the posting.

Optionally, you can use a posting rule to first post the entire goods receipt to a central clearing account, for example Goods receipt. The distribution to the stock accounts then takes place automatically via the product groups. This variant makes sense if you want a clear accounting separation between goods receipt and invoice receipt.

How you define accounts and valuation method in the product group is described in the article "Product groups, valuation methods, stock accounts".

Steps: Assign a delivery note to the goods receipt

The delivery note is a separate document type in the procurement module. You can record delivery notes manually or read them in via OCR scan (Hypatos). The primary recognition target is the order number for the automatic assignment to the goods receipt.

  1. Open the recorded delivery note in the detail form.

  2. Select Assign. Scopevisio shows open goods receipts for the supplier. If an order number is recognised, Scopevisio directly suggests the matching goods receipt.

  3. Assign the delivery note items to the goods receipt items.

  4. Confirm the assignment.

Important: The comparison is only possible as long as no goods receipt has yet been posted for the referenced order. A prerequisite for the automatic assignment is the correct OCR recognition of the order number.

Assign an incoming invoice to the goods receipt

You can assign an incoming invoice to a goods receipt manually or rule-based. Which way applies depends on whether the invoice arrives before or after the goods receipt. The complete steps and the rules are described in the article Incoming invoices.

Incoming invoice arrives after the goods receipt

This is the normal case: the goods receipt is posted, the invoice follows.

  • In the invoice receipt book, the Assign button is available. Based on supplier and delivery note number, Scopevisio checks whether a matching goods receipt exists and creates the link automatically.

  • Alternatively, a rule triggers the assignment when the invoice is uploaded, without a manual click. You find the setup in the ribbon under Stammdaten Beschaffung → Einstellungen.

Incoming invoice arrives before the goods receipt

In practice, the supplier sends the invoice electronically while the shipment is still on its way. The invoice is in the system, the goods receipt is still missing.

  1. The incoming invoice is recorded. There is no goods receipt, and the rule does not find a goods receipt.

  2. The goods arrive, and you post the goods receipt.

  3. Scopevisio automatically assigns the incoming invoice to the posted goods receipt. The manual click on Assign is not needed.

The assignment takes place at the earliest possible time: directly when the goods receipt is posted.

Important: A prerequisite for all automatic variants is that supplier and delivery note number were recognised when the invoice was recorded. If one of the two fields is missing, the automatic assignment does not apply. The manual way via Assign remains available.

Create goods receipts via the API

You can create goods receipts via the Scopevisio API, analogous to the order API. The mapping runs via Lobster, so that any incoming documents, for example DESADV/EDIFACT, can be converted automatically into goods receipts.

  • Scopevisio writes the goods receipt via the delivery note number as a full delivery of an order.

  • Posting date and document date are transferred. Backdated postings are possible as long as the posting period is not closed.

  • With complete order comparison, the posting can be triggered automatically.

  • For quantities not delivered in full, a reorder can be created automatically.

You find technical details in the OpenScope documentation under Schnittstellen → OpenScope.

Post a goods receipt with Scopevisio 2Go

Scopevisio 2Go is the mobile app for warehouse processes, available for iOS and Android. With the app, you post goods receipts, pick and check stocks directly at the goods receiving gate, without a desktop workstation.

  1. In Scopevisio 2Go, start via Lagerverwaltung → Wareneingang. You see open orders waiting for goods receipt. You can start either via the order (all expected items at a glance) or directly via the barcode scan of a product.

  2. Record the products via smartphone camera, external scanner or manual search. Supported formats are EAN-13, EAN-8, GTIN and internal product numbers. You can check quantities individually or accept them in one step.

  3. Enter the delivery note number.

  4. Click Wareneingang buchen.

Scopevisio then increases the stock, updates the order and creates the goods receipt entry for invoice verification, identical to the desktop process.

Permissions for the goods receipt in Scopevisio 2Go

For the goods receipt in Scopevisio 2Go, your Scopevisio user account needs:

  • License for procurement

  • Permission for goods receipt

  • Access to the relevant storage locations

You assign the permissions in Scopevisio under Organization → Administration → Benutzer.

If a goods receipt does not work

The following table shows typical problems with the goods receipt in the Scopevisio Client and in Scopevisio 2Go and what you check in each case.

Problem

Solution

Order is not displayed

Check the status of the order. Only orders with the status open appear.

Product is not recognised when scanning in Scopevisio 2Go

Check the EAN/barcode on the product and, if necessary, search manually.

Storage location cannot be selected

Check the permission for the storage location.

Goods receipt can be saved but not posted

Check whether the setting Delivery postings require full order matching is switched on. Then the entire quantity of each product item must be assigned to order items. A goods receipt without an order reference or with a quantity above the open order quantity cannot be posted.

Goods receipt cannot be posted although the order comparison is complete

Check the network connection and whether all required fields are filled in.

If the problem persists, ask in the chat for a handover to the support team.

Frequently asked questions about goods receipts

What is the difference between goods receipt and incoming invoice?

The goods receipt records the physical delivery, the incoming invoice records the supplier's invoice. The following table compares both documents in Scopevisio:

Aspect

Goods receipt

Incoming invoice

What is recorded?

The physical delivery of the goods or acceptance of a service/right

The supplier's invoice

Legal significance

Transfer of possession/ownership

Documentation of the claim

Accounting effect

Increases the stock, reduces the open quantity in the order (quantity posting)

Records the liability (value posting)

Due date

–

Triggers the payment term

Time

On acceptance of goods

On receipt of invoice

Basis

Order + delivery note

Supplier's invoice

Verification

Does the delivery match the order? Are the quantities covered by the order?

Does the invoice match order and delivery? Are unit price and quantity correct?

The three documents order (What was ordered?), goods receipt (What was delivered?) and incoming invoice (What is being charged?) can be checked for consistency (3-way matching).

Which account does Scopevisio post to at goods receipt?

At goods receipt, Scopevisio posts to the stock account and stock change account of the product group of the product. Scopevisio does not use an expense account at goods receipt.

Does a return change the incoming invoice?

No, a return does not change the incoming invoice in Scopevisio. The return only posts the stock back.

Related articles about goods receipts

Did this answer your question?