Skip to main content

Check, adjust and transfer order proposals to an order

Order proposals show where you need to order. Here is how they arise, how to transfer them and why the list can be empty.

Order proposals show you in the Scopevisio Client where there is a need to order. You open them in the ribbon under Procurement → Order proposals, check them and transfer them to a purchase order with Transfer to order.

This article applies to users in purchasing who process order proposals. An empty list means: Scopevisio does not detect any uncovered demand, either because everything is actually covered or because a product does not meet the prerequisites (see section "If a product is missing in the order proposals").

Overview of the order proposals in the Scopevisio Client

The overview of the order proposals is the starting point for order planning. It summarizes the open procurement demand from order shortfalls and reorder points that have been undercut, and groups it by location and supplier.

For each entry, the overview shows:

  • Location

  • Supplier

  • Number of items

  • Totalled order value

This lets you assess urgency and sequence before you open an order proposal. Above the list, the process bar that is standard in Scopevisio shows the status in the process from order receipt to invoicing. As in every Scopevisio work list, you can also set filters and sort orders.

In the example in the following image, Scopevisio has calculated order proposals for seven suppliers. For each supplier, the overview shows location, number of items and order value, so it is immediately clear what you need to process first.

The overview of the order proposals in Scopevisio per supplier with location, number of items and order value

The image shows the overview of the order proposals in Scopevisio per supplier with number of items and order value

Open an order proposal

Double-click a table row in the overview of the order proposals. The detail area of the order proposal contains three areas:

Area

Content

Items

Products, quantities and prices of the planned purchase order

Reservations tab

Which orders and requirement requests triggered this order proposal. The coverage relationship can be read directly here.

Product suppliers tab

Supplier master data for the respective product. You can check, add or correct entries here without switching modules. You can also extend, edit or adopt the data here. This lets you add individual products to your purchase order without searching in the product data overview.

Reservations of an order proposal: order quantity instead of ordered quantity

The Reservations tab shows the associated order for the order proposal with the quantity that currently cannot be fulfilled from stock. In the example in the following image, these are the quantities still missing from order AU-23-60. A quantity is missing if it cannot be reserved in sufficient numbers in the warehouse or in an incoming purchase order.

The reservations of an order proposal in Scopevisio with the missing quantity from order AU-23-60

The image shows the reservations of an order proposal in Scopevisio with the missing quantity from order AU-23-60

Important: The reservations in the order proposal do not show the order quantity, but the purchase quantity calculated by Scopevisio: order quantity − available stock = purchase quantity. This applies to all products and quantities that are reserved in orders and add up to one quantity. You therefore no longer have to look in detail at the order and stock of an individual product.

Filter reservations and order only part of the quantity

With the filter in the yellow header row of the Reservations tab, you filter by requested date and product number. This lets you calculate the suitable quantity for the current purchase order, taking the replenishment lead time into account. It can make sense to order only part of the proposed quantity if the requested date is further in the future than the supplier's delivery time.

How Scopevisio calculates order proposals

Scopevisio creates order proposals, but no purchase orders. Replenishment planning calculates order proposals when events occur and additionally once a day. The purchase order is only created when you transfer the order proposal.

Sources of an order proposal

The following table shows the two types of demand from which an order proposal arises.

Type of demand

When does an order proposal arise?

Reorder point undercut

The stock of a product is below the reorder point that you have stored per product and location or storage bin. The next replenishment planning (when events occur and daily) creates an order proposal up to the maximum stock. The order proposal is not created immediately when the goods are withdrawn.

Order shortfall

One or more orders or requirement requests cannot be fully fulfilled with the existing stock and open purchase orders. Scopevisio proposes the missing quantity for ordering.

If both types of demand apply to the same product at the same time, Scopevisio adds the quantities.

Order quantity for an order shortfall

For an order shortfall, the order proposal does not calculate the quantity ordered in the customer order, but the actual shortage: order quantity − stock − quantity already ordered. Scopevisio sums the shortage across all open customer orders and across products.

The following calculation examples show the calculation for one product:

  • An order comprises 100 units, 40 units are in stock: The shortfall and thus the order proposal is 100 − 40 = 60 units

  • An order comprises 100 units, 40 units are in stock and 10 units are already ordered: The order proposal is 100 − 40 − 10 = 50 units

For the calculation via order shortfall, you do not need to maintain a reorder point or a maximum stock. The maintenance effort is therefore low.

Prerequisites for a product in the order proposal

A product from an order only appears in the order proposal if all three conditions are met:

  • The product has a base unit.

  • The product type of the product is marked as reservable in the procurement settings.

  • The product is not blocked.

Further causes for missing order proposals are described in the section "If a product is missing in the order proposals".

Which supplier appears in the order proposal

Replenishment planning preferably selects the default supplier of the product for the order proposal. If no default supplier is stored, it selects another supplier of the product that is valid on the order date. A default supplier has no validity period.

A default supplier is not a prerequisite for an order proposal. If the product has no valid supplier, Scopevisio creates the order proposal without a supplier. Then enter a supplier before saving or ordering.

Before transferring to a purchase order, you can change the supplier in the order proposal to another maintained supplier of the product.

Edit an order proposal in Scopevisio

Before transferring to a purchase order, you can change the following in the order proposal:

  • Quantities of individual items

  • Prices of individual items

  • The supplier (change to another maintained supplier of the product)

You can also add further products from the same supplier. This is useful to consolidate purchase orders and reduce freight costs.

Important: As soon as you save an order proposal, Scopevisio freezes it. New orders or changed order quantities that arise afterwards are no longer taken into account by Scopevisio in this order proposal. If an order proposal is to reflect the current total demand, transfer it directly to a purchase order. Alternatively, delete it and let Scopevisio create a new one.

Important: As long as you have not saved an order proposal, Scopevisio calculates it automatically based on all currently available information. Check which investments you want to make and when.

Steps: Transfer an order proposal to a purchase order

With these steps, you turn an order proposal into a purchase order in the Scopevisio Client.

  1. In the ribbon, open Procurement → Order proposals and double-click the order proposal.

  2. Check the order proposal and adjust it if necessary. For an order proposal without a supplier, enter a supplier.

  3. Click Transfer to order. If you want to send the purchase order straight away, transfer the order proposal with Transfer to order and send.

This creates the legally binding purchase order document. The order that triggered the demand changes from red to yellow in order control. From this moment, Scopevisio takes the expected delivery into account in the date calculation.

Transfer an order proposal to an order enquiry

If you want to obtain a quotation before the binding purchase order, click Transfer to order enquiry in the order proposal. Scopevisio creates an order enquiry from it (ribbon Procurement → Order enquiries). More on this in the article "Create an order enquiry and process a supplier quotation".

Print or export an order proposal

Using the action buttons, you can print the order proposal or export it as PDF or Excel. This lets you send it to a supplier for information and obtain a quotation before you trigger a binding purchase order. The export is suitable as an informal way for simple enquiries without a formal quotation procedure.

Delete an order proposal

You can delete an order proposal if you do not want to process it further, for example because you cover the demand in another way or because the order has been canceled.

Important: As long as the underlying demand exists (open order, reorder point undercut), Scopevisio creates a new order proposal at the next replenishment planning. You can only avoid an order proposal permanently if the demand itself ceases to exist. This is possible through:

  • Cancellation of the order

  • Manual stock posting

  • Adjustment of the stock limits on the product

How order proposals and order control work together

The following table shows how order control changes when an order proposal is created and processed.

Step

What happens

Order entered, stock is not sufficient

Order control shows red. Scopevisio creates an order proposal.

Order proposal transferred to a purchase order

Order control changes to yellow. Scopevisio takes the expected goods receipt into account in the delivery date calculation.

Goods receipt posted

Order control changes to green. You can pick the order.

As long as an order proposal has not been transferred to a purchase order, the order stays red in order control, even if the order proposal already exists. Only the purchase order counts as committed coverage.

If a product is missing in the order proposals

An empty list of order proposals can have two different causes.

Situation

What it means

Order control shows green or yellow, there are no open order proposals

Everything is covered. Stock and open purchase orders are sufficient for all orders and reorder points. No action is needed.

Order control shows red, but no order proposals are visible

Scopevisio cannot create an order proposal for the product concerned. The cause lies in the master data (see the following checklist).

For the product concerned, check in sequence which check item applies:

Check item

Where to check

Base unit stored?

Product → Stammdaten tab → Base unit. Without a base unit, Scopevisio does not take the product into account.

Product type marked as reservable?

In the procurement settings. Scopevisio only takes products with a reservable product type into account.

Product blocked?

Scopevisio does not take blocked products into account.

Product assigned to the correct location?

Scopevisio calculates order proposals per location. Check whether the order and the product have the same location.

Note: If a supplier is missing, the order proposal is not missing. Scopevisio creates it without a supplier. In this case, check whether a supplier valid on the order date is entered for the product on the Product suppliers tab.

If the problem persists, ask in the chat to be connected with the support team.

Frequently asked questions about order proposals

Why does a saved order proposal cover my current demand?

A saved order proposal covers your current demand because Scopevisio does not output new demand for the same supplier as a separate proposal if a saved order proposal for this supplier already exists. The demand is frozen in the existing order proposal. Open the existing order proposal and check whether the current demand is included there or needs to be added manually.

Do I have to delete an order proposal?

No, you do not have to delete an order proposal. As long as you have not saved an order proposal, it is up to date without manual intervention, based on the quantity in the order or in the requirement request, the stock quantity and the quantity in open purchase orders.

Does an order proposal automatically create a purchase order?

No, an order proposal does not create a purchase order automatically. Replenishment planning only creates order proposals. The purchase order is only created when you accept the order proposal with Transfer to order.

Is a default supplier a prerequisite for an order proposal?

No, a default supplier is not a prerequisite for an order proposal. Replenishment planning preferably selects the default supplier, otherwise another supplier of the product that is valid on the order date. If the product has no valid supplier, Scopevisio creates the order proposal without a supplier.

Related articles about order proposals

Did this answer your question?