With purchase orders in the Scopevisio Client, you create and document a contract, in particular a purchase contract, with your supplier. You open them in the ribbon under Procurement → Orders. This article shows how a purchase order is created and how you create, send, have confirmed and import it and post the goods receipt for it.
This article applies to users with procurement activated and the right to the Purchase order form. By default, the Purchaser profile has this right, see Roles and rights for procurement.
Process overview: The sales process from orders to payments and below it the procurement process from order proposals via orders, goods receipts and invoices to payments
Where do I see all my purchase orders in the Scopevisio Client?
In the Scopevisio Client, click Orders in the ribbon. The overview shows all purchase orders with their status and all related information. Like every overview in Scopevisio, it is organised as a worklist. You can filter it using arguments and save the filters as a personalised worklist:
Use quick filters for targeted overviews
Create individual worklists and save them under a specific name
What can I do in the purchase order overview?
From the purchase order overview, you have the following options:
Add a new purchase order: Click Add.
Edit an existing purchase order: Double-click a row to open the purchase order.
Duplicate a purchase order: Create a copy of an existing purchase order.
Transfer a purchase order to a delivery: Start the goods receipt directly from the overview.
Import a purchase order via CSV: Use the multibutton for mass imports.
In which ways is a purchase order created in Scopevisio?
A purchase order can be created in four ways. All routes lead to the same result: a legally documented purchase contract with the supplier, which serves as the basis for goods receipt and invoice verification.
Create a purchase order from an order proposal
Replenishment planning creates order proposals, but no purchase orders. The purchase order is only created when the purchaser accepts the proposal with Transfer to order (or In Bestellung überführen und versenden).
The basis of the order proposals are open orders, requirement requests and the stock. You store the reorder point as well as the minimum and maximum stock per product and location or storage bin. If the stock falls below the reorder point, the next replenishment planning creates an order proposal up to the maximum stock, not immediately when the goods are withdrawn. Replenishment planning runs when events occur and additionally once a day.
Replenishment planning preferably selects the default supplier, otherwise another supplier of the product that is valid on the order date. If the product has no valid supplier, Scopevisio creates the order proposal without a supplier. Then enter a supplier before saving or ordering.
This route is the standard case for stock-managed products and recurring consumables. It is most efficient when you maintain assortment and suppliers in the master data. More on this in the article Order proposals.
Create a purchase order from an order enquiry
The order enquiry is used to obtain quotations from one or more suppliers before a binding purchase order is triggered. After receiving and comparing the quotations, you transfer the order enquiry to a purchase order.
This route is suitable if price or supplier is not yet determined, for example for larger procurement projects, new products or if you want to compare several suppliers. More on this in the article Order enquiry.
Create a purchase order directly from a customer order
With the procurement license activated and the corresponding right, the Transfer to order button appears in the customer order. Scopevisio creates a purchase order directly from it. Project number, all items and the supplier proposed from the product suppliers master data are taken over. The reservation of the customer order is considered fulfilled for the items taken over. No additional order proposal is created.
This route is suitable if supplier and terms are already known and no stock check is required, typically for project-related individual procurements or the direct commissioning of a service provider. More on this in the article Direct order from customer order.
Create a purchase order manually
You can create a purchase order at any time directly from the purchase order overview, without a predecessor and without an automatic proposal. You enter supplier, products, quantities and prices manually.
This route is suitable for one-off procurements, new suppliers or as an entry into the process if there is not yet a complete master data basis. It is also possible without order control. The efficiency gain from automatic assignment in the background is retained.
Steps: Create a purchase order manually in the Scopevisio Client
In the purchase order overview, click Add.
Select the supplier from your contacts.
Using Add, select the products and quantities you want to order.
Adjust prices and units if necessary. This is possible in an individual purchase order.
The quantity is documented in the Delivery quantity field. If the master data record for product suppliers, units and prices is maintained, Scopevisio takes this information over into the purchase order.
Add products to the purchase order
In the purchase order, start from the Product number cell. There you have the following options:
Add individual products manually. You identify them by product name or product number.
Create a new product
Take over products from the Product suppliers area. The overview of the product suppliers is collapsed by default.
Important: You can only take products with a base unit and a reservable product type into a purchase order. Which product types are reservable is determined by the procurement settings, see Procurement settings.
Search for a product in the purchase order
When adding a product to the purchase order, you search in this way:
Using your own product number or product name
Using the supplier's product number, the supplier or the name in the product suppliers
Insert text lines and headings in the purchase order
Besides product items, you can also insert lines of the type Text in a purchase order. A text line contains only freely worded text, such as a section heading, a delivery note or an internal note. It has no article, no quantity and no price and affects neither the total nor the goods receipt.
Insert a new item line.
Select the type Text. The procedure corresponds to that in orders and outgoing invoices.
Enter the text.
Save the purchase order.
Scopevisio saves the text line and outputs it in the purchase order document (print/PDF) at the entered sequence position. You can also set headings to structure your purchase order.
Text lines and headings do not affect order quantities, totals or the goods receipt. The order of the lines (product and text lines mixed) can be chosen freely and is output in the document exactly like that. In terms of process, it serves to communicate secondary conditions to your supplier.
Delivery date of a purchase order
When you create a purchase order, Scopevisio automatically sets a delivery date. The starting point is the current date, to which the system adds a buffer of 10 days.
If a delivery time is stored for the supplier on the product supplier entry, Scopevisio uses this value instead. The stored delivery time therefore takes precedence over the system default of 10 days.
The calculated date is in the header of the purchase order and can be adjusted manually there. Scopevisio uses it to calculate the plan date of an order.
Service period in purchase orders
As an alternative to the delivery date, you can store a service period with a from and a to date in order enquiries and purchase orders. This date range serves exclusively for external communication. It has no functional connection to the desired delivery date or to the internal delivery date control.
Fields of a purchase order
The following table shows the essential fields of a purchase order:
Term | Description |
Product | Product that was ordered |
Name/designation of the ordered product | Detailed designation of the ordered product |
Quantity | Total quantity of the purchase order |
Number of units | Number of individual units |
Price | Price per unit or total price |
Unit or total price | Indication of whether it is a unit price or a total price |
The following table shows the extended fields of a purchase order:
Term | Description |
Definition | Explanation of the term or article |
Delivery unit | Unit of the delivery (e.g. pallet, carton) |
Unit of measurement | Piece, kg, litre, etc. |
Delivery date | Planned date of the delivery |
Actual delivery date | Date on which the delivery actually takes place |
Desired delivery date | Date desired by the customer |
Requested delivery date | Date that the customer prefers |
Location | Place where the delivery is to take place |
Delivery address | Complete address for the delivery |
Planned delivery date | Date planned by the system or project |
Proposed by the supplier | Date proposal from the supplier |
Confirmed delivery date | Date confirmed by the supplier |
Binding confirmation | Finally promised date |
Supplier product number | Article number of the supplier |
Supplier article number/SKU | SKU or internal number of the supplier |
Project | Associated project or cost center |
Description | Short description of the article |
Technical details/specification | Technical data or specifications |
Reservations | Reserved quantities |
Earmarked demands | Planned demands |
Documents | Relevant documents |
Attachments | Data sheets, delivery notes, invoices etc. |
Confirmation | Order confirmation from the supplier |
Status | Processing status (open, confirmed, delivered etc.) |
Supplier advisor | Contact person for the supplier |
Service period (from..to..) | Period for service or material consumption |
Steps: Send a purchase order in the Scopevisio Client
You can send the purchase order to the supplier directly from the form. You have the following shipping options:
Send by letter
Send by e-mail (including PDF attachment)
Sending by e-mail is the default everywhere. As the recipient address, Scopevisio uses the business e-mail address of the contact.
Additional functions are available when sending:
Text modules for the document
Text modules for the e-mail
Add further documents from Teamwork
Change of the sender for the individual dispatch
Set the sender address for sending purchase orders
You define the e-mail address from which Scopevisio sends purchase orders with the setting E-Mail Absender (Bestellung). It only applies to purchase orders. You find the setting in two places, which edit the same setting:
In the Scopevisio Client under Settings → Funktionsbereiche → Procurement → Allgemein
In the ribbon Organization → Stammdaten → Procurement → Settings
The following selection is available:
System: Scopevisio uses the sender from the e-mail settings of the system. This is the default.
Aktueller Benutzer: Scopevisio uses the current user as the sender.
Supplier advisor: Scopevisio uses the address of the supplier advisor of the purchase order. It is preset from the setting of the same name.
Manuell: You store a fixed address and a name.
In the send dialog, the sender is preset with this setting. You can change it for the individual dispatch. Exactly one valid e-mail address is permitted.
Purchase order status after sending
After sending by e-mail or letter, the purchase order status changes automatically. This makes it traceable for everyone that the supplier knows the purchase order. You do not have to clarify whether an individual purchaser has sent the purchase order. This is clearly visible to everyone in the system and speeds up the process.
Approval process for purchase orders
Scopevisio can submit purchase orders for approval via the Allgemeiner Freigabeprozess. The approval process exists for purchase orders and for quotations to customers, not for order enquiries. You must activate it as the function Allgemeiner Freigabeprozess and set it up using rules. A threshold is one possible rule, but not the only one.
While the approval of a purchase order is running, the following applies:
You cannot send the purchase order
You cannot confirm the purchase order
You cannot transfer the purchase order to a goods receipt
Editing and saving remain possible
Printouts bear the note "not approved"
Scopevisio sends an e-mail to the approving person only if the notification template is active.
Process the supplier's order confirmation for the purchase order
Why do I need the order confirmation?
For the purchase contract between you and your supplier to be valid, you need:
A purchase order
Acceptance of your purchase order by the supplier
Note: The formal acceptance can be omitted (commercial letter of confirmation) or substituted. If there is a deviation between purchase order and confirmation, the principle of the commercial letter of confirmation also applies.
Steps: Transfer the order confirmation into the purchase order manually
You receive the supplier's order confirmation.
Check whether the confirmed information matches your purchase order.
Compare all details exactly.
Transfer the relevant details into the purchase order manually.
Enter the confirmed delivery date.
The status of the purchase order changes automatically to "confirmed".
Steps: Read the order confirmation automatically
In the purchase order, open the Confirmation tab.
Drag the supplier's order confirmation onto the active area on the left.
The document appears on the right-hand side. On the left-hand side, you see your master data from the product suppliers.
Scopevisio reads the following line information:
Product name
Product number
Unit
Quantity
Price
You then process the data:
Assign a product and a unit manually if necessary.
Click Apply confirmation to update the purchase order.
This way, Scopevisio takes product, price and quantity over into the purchase order. In addition:
Scopevisio links the information to your master data
Scopevisio writes the confirmed delivery date
Scopevisio changes the status of the purchase order to "confirmed"
This gives you:
A clean basis for purchase order, goods receipt and invoice processing
No manual reading of the document, detecting deviations and transferring data
Transparency about deviations
Deviations between purchase order and order confirmation
Scopevisio shows you where the confirmation deviates from your data. You can accept the deviations by taking over the data of the confirmation.
If you want to object:
Send your purchase order to the supplier again.
Add a corresponding note.
Until when can I apply the order confirmation?
You can only use Apply confirmation as long as no goods receipt has been posted for the purchase order. In the procurement process Ordered → Confirmed → Delivered → Invoiced, the reliable reference for the expected delivery quantity is not the purchase order but the order confirmation. The purchase order is your request to the supplier. Only the confirmation is the contractually assured quantity (cf. commercial letter of confirmation). Applying the confirmation sets the order quantity to this assured quantity. This is the figure against which the delivery status (partially delivered / fully delivered) is then calculated.
Important: The first posted goods receipt freezes the purchase order. Quantities, products and prices can then no longer be changed via Apply confirmation.
Therefore, process the confirmation before the first goods receipt. Example: You order 1,000 units, the supplier confirms 800.
If you apply the confirmation before goods arrive, the purchase order is for 800. The later delivery of 800 units covers it completely (full delivery).
If, on the other hand, you first post a goods receipt of 800 units against the purchase order that still stands at 1,000, the difference of 200 units remains as an open remaining quantity. It can no longer be corrected via the confirmation.
Such an open remaining quantity is an open delivery claim against the supplier. Clarify it in direct consultation with the supplier. This is exactly why processing the confirmation before the first goods receipt is the clean way: It keeps the order quantity true to the contract and thus the downstream evaluations, in particular the order proposal, correct.
Import purchase orders
When is importing purchase orders worthwhile?
For large suppliers where you have to place orders in the online shop, it is advisable to write the purchase order with the order confirmation. This saves effort and ensures consistent processing. You can also import documents that were not created by Scopevisio. This keeps Scopevisio up to date with external systems of partners or suppliers.
Steps: Import a purchase order via CSV
In the purchase order overview, instead of Add, open the multibutton Per CSV importieren. A new form opens.
Check the import settings.
Select the CSV file.
The file name of the import file follows this convention:
<Kontakt-Master-ID>_<Belegdatum>_<Belegnummer>.csv
<Kontakt-Master-ID>(optional): The master ID of a contact that corresponds to a supplier<Belegdatum>(necessary): The date of the purchase order in basic ISO-8601 format (YYYYMMDD)<Belegnummer>(optional): The (external) document number of the purchase order
Minimal representation:
20230530.csv
If Scopevisio cannot recognise the format, enter yourself:
The contact that corresponds to a supplier (required)
The document date (required)
The external document number (optional)
The Location is preset by default. You can adjust it in the form.
Import purchase orders via electronic formats (EDI, XML, EDIfact, iDoc)
Scopevisio supports structured data formats to import purchase orders efficiently. The data service brings your supplier's source data to the target format cost-effectively. Once set up, Scopevisio writes order confirmations as purchase orders in Scopevisio. If you want to use this, ask in the chat to be connected with the support team.
Scopevisio assigns product and unit data consistently or marks them as order candidates if no assignment is possible. The assignment runs via:
Product supplier number
Product supplier EAN/GTIN
Product EAN/GTIN
Unit
Product SKU
If Scopevisio finds no unique assignment, it creates an order candidate.
This gives you:
Consistent data throughout the entire process of order confirmation, processing of the goods receipt and invoice verification
Correct display of inventory prices without manual intervention
Cost-effective connection of your main suppliers
If you regularly place extensive purchase orders, the Professional Service team will advise you. It checks the possibilities of data transfer for your requirements. You can find out from your contact person which suppliers are already connected as standard.
Process order candidates after the import
Order candidates arise when Scopevisio encounters differences in the master data when importing a purchase order, for example when a product is not yet part of your master data in Scopevisio.
Note: If there are order candidates, Scopevisio shows a warning in the purchase order overview.
Order candidates show all line information that Scopevisio has received. You can change lines using the commands Add and Remove.
Create unknown products from the order candidate
Previously unknown products are shown in black in the description, not grey. The button Produkt hinzufügen zum Produktstamm is active. You can create unknown products directly from this view, using the rules of the products or at least using all available information from the supplier. This way, you take the information directly into the product and minimise the effort for master data maintenance. Here you can define a base unit and a delivery unit and thus control the process seamlessly.
Assign existing products with different units in the order candidate
Products that the supplier communicates in a unit other than the one stored so far can be assigned via an alias. Example: You manage a product as KT (carton), your supplier uses the unit BX (box). You can assign this once without changing your master data, so that the supplier's next order confirmation arrives directly. This is possible for base units and for delivery units.
Select the corresponding line in the order candidate.
Select Einheit als Alias für die Liefereinheit or Einheit als Alias für die Basiseinheit.
A message confirms the assignment.
Handle returns on the order confirmation in the order candidate
If returns have already been recorded on your supplier's order confirmation, Scopevisio can take these over as well. In the order candidate step, you decide:
Ignore the line
Create a return directly from this data, so that in the invoice verification view you find and can assign both delivery and return
Update product suppliers when importing purchase orders
When importing purchase orders and goods receipts, Scopevisio can create or update the product suppliers. This way, for example, you always have price changes up to date via the import of the order confirmation. You control this with a procurement setting that is reachable in two places and edits the same setting in both:
In the Scopevisio Client under Settings → Funktionsbereiche → Procurement → Import: setting Beim Import von Bestellungen/Wareneingängen (Produktlieferanten)
In the ribbon Organization → Stammdaten → Procurement → Settings, card Importeinstellungen: setting Produktlieferanten beim Import von Bestellungen/Wareneingängen
The following selection is available:
Produktlieferanten erzeugen/aktualisieren: Scopevisio creates or updates the product suppliers during the import.
Produktlieferanten weder erzeugen, noch aktualisieren: Scopevisio does not change the product suppliers during the import. This is the default.
The import reports which variant applies. Further import settings are described in the article Procurement settings.
Steps: Post the goods receipt for a purchase order
From the purchase order, you transfer the purchase order to a delivery and thus represent the goods receipt.
Steps: Post a complete delivery for the purchase order
When the purchase order is delivered, transfer it to a delivery starting from the purchase order.
Check the purchase order information taken over: product, quantity, price and unit.
Change the quantities if necessary. This way, a partial delivery of a purchase order does not present you with any challenges.
Click Save to save the process temporarily.
Enter the delivery note number.
Enter the posting date. In most cases, this is today.
Click Post.
You enter the delivery note number manually. It is important because it later helps in the invoice receipt book (ReBu) to trace and automatically check the supplier's incoming invoice. In addition, you can see which delivery you received what from the supplier. This serves the clarity of the journal entry.
After posting, the process appears in the table of goods receipts and disappears from the table of open purchase orders.
Steps: Post a partial delivery for the purchase order
Sometimes you do not receive all the goods ordered in one delivery. You receive purchase order items or quantities available from the supplier directly, others are delivered later. You can only allocate individual items received to the purchase order. You take the delivered items from the list of goods receipts. For partial deliveries, you can enter individual items and allocate them to the associated purchase orders via the order comparison.
In the ribbon, click Goods receipts. The overview always refers to the warehouse or location for which the purchase order was created.
Double-click a row of the overview to open the goods receipt. You see the details of the goods receipt, including the predecessor and successor document, if available.
Click Order comparison. This determines the extent to which the recorded goods receipt balances the associated purchase order items.
Go back to the goods receipt.
In the Further details area, enter a posting date.
Click Post.
Scopevisio shows any remaining quantities from the purchase order that have not yet been delivered as not matched. Order quantity minus delivered quantity gives the remaining quantity of the purchase order. With this step, you keep your order quantities and their remaining quantities correct.
Important: After posting, you can no longer correct or change the comparison of purchase order and goods receipt.
Tip: First check the delivery for quantity and quality. Then answer the question of the completeness of the purchase order from the overview of purchase orders in the Orders ribbon. This is done very quickly.
Typical process of a purchase order in Scopevisio
Entry: You enter product, quantity, price and unit and transmit this to the supplier.
Supplier response: The supplier responds with planned delivery date, product confirmation, quantity confirmation and price confirmation.
Order acceptance: After order acceptance, the confirmed delivery date and confirmation are available, and the status changes.
Delivery: On delivery, the actual delivery date, documents (for example the delivery note) and the posting of the stock are added.
If posting a goods receipt for a purchase order does not work
If the setting Delivery postings require full order matching is active in the procurement settings, Scopevisio can only post a goods receipt or delivery note if the entire quantity of each product item is allocated to purchase order items.
Cause: The goods receipt has no purchase order reference, or the delivered quantity is above the open order quantity. Saving is possible in both cases, posting is not
Solution: Allocate the quantities of the product items to the purchase order items via Order comparison. Partial deliveries are allowed; the purchase order itself does not have to be fully delivered for this. If the setting is switched off, Scopevisio posts a surplus quantity without a purchase order reference. How the setting works is described in the article Procurement settings.
If the confirmation from the supplier can no longer be applied to the purchase order, a goods receipt has usually already been posted. The reasons are described above in the section on the time limit for applying the confirmation.
If the problem persists, ask in the chat to be connected with the support team.
Frequently asked questions about purchase orders
Does an order proposal automatically create a purchase order?
No. Scopevisio only creates a purchase order from an order proposal when the purchaser accepts the proposal with Transfer to order (or In Bestellung überführen und versenden).
Does an order proposal need a default supplier?
No. A default supplier is not a prerequisite for an order proposal. If the product has no valid supplier, Scopevisio creates the order proposal without a supplier. Before saving or ordering, you enter a supplier.

