Skip to main content

Procurement terms in Scopevisio: glossary

Glossary of procurement in Scopevisio: terms for orders, purchase orders, warehouse, units, goods receipt, dates and batches.

The Scopevisio procurement glossary explains the terms you encounter in the Scopevisio Client under Procurement and sorts them by topic. It applies to everyone who handles purchasing, warehouse and invoice verification in the Scopevisio Client. Within each group, the terms are in alphabetical order. The article Procurement in Scopevisio: overview, process and terms explains the procurement process.

Terms for orders, purchase orders and enquiries in procurement

The following terms describe the documents that Scopevisio procurement creates from demand to purchase order.

  • Customer order: Your customer's order to you, which is managed in Scopevisio as an order. A customer order is a legally binding document that records a purchase contract, contract for work or similar. The customer order is the basis for all further processes such as reservation, picking and delivery.

  • Order enquiry: An enquiry to one or more suppliers to obtain a quotation for specific products. The order enquiry is non-binding and serves to obtain information on price, availability and quantity. It is the first step in the procurement process. More in the article Create an order enquiry and process a supplier quotation.

  • Order proposal: Calculated from all available information: quantity in the customer order/requirement request, quantity in the warehouse/location, quantity in purchase orders, (quantity stored as reorder point). The result is the quantity that would have to be ordered to put you in a position to fulfill all customer orders and requirement requests. More in the article Check, adjust and transfer order proposals to an order.

  • Purchase order: Goes to your supplier and determines which product is to be delivered and invoiced by this supplier, in what quantity and at what price. A purchase order is a legally binding document that records a purchase contract, contract for work or similar. Together with the customer order and the invoice, the purchase order is one of the 3 most important documents in the organization. More in the article Create, send and import purchase orders in Scopevisio.

  • Requirement request: A request for the issue of specific products in a certain quantity and value, also called BANF (German abbreviation for Bedarfsanforderung), submitted by a requester. A requirement request is created before the purchase order. It is the basis for replenishment planning and purchasing planning. In the ribbon, you open it via Requirement requests → Requirement requests. Until April 2025, it was called requirement notification. The current term is requirement request. More in the article Create and change a requirement request.

  • Supplier quotation: Your supplier's quotation in response to an order enquiry, with price, quantity, lead time and delivery terms. A supplier quotation is a legally binding offer. Several quotations are compared to choose the best one.

Terms for order control, picking and stock withdrawal

The following terms describe how Scopevisio reserves orders and assembles goods from the warehouse.

  • Order control: Planning run of the reservation by FIFO (First In, First Out), desired delivery date, execution and confirmation via the Pick command. All orders are sequenced according to their requested date and creation order, stock and goods incoming from the supplier are reserved, and a corresponding delivery date is calculated. Order control also lets you select order items and marks products in the reservation view so that you can estimate the effect of a redistribution via prioritization. More in the article Order control: delivery status, symbols and picking.

  • Partial picking: Extends picking so that partial quantities of the order can be picked, here as a whole item. The item can then be passed on to delivery and invoice. This enables partial deliveries to customers.

  • Picking: The assembly of products from the warehouse for a customer order or a requirement request. Picking is time-consuming and costly. Faulty picking leads to complaints. The German terms Kommissionierung and Picking are synonyms, but Picking is often used for automated processes. Efficient picking reduces throughput times.

  • Stock withdrawal: The removal of goods from the warehouse for customer orders, production or other purposes. The stock withdrawal posts the goods out of stock. This happens automatically in the picking or delivery step, or manually. All movements must be documented to maintain stock consistency.

Terms for warehouses, locations and storage bins

The following terms describe how you structure warehouses, locations and storage bins in Scopevisio.

  • Aisle: Area in the warehouse that serves orientation on the way to the storage bin. The aisle helps staff find their way around the warehouse and reach the desired storage bin faster.

  • Location: A location is described by a postal address. A location can have several warehouses, for which individual stock limits can be stored. A company can have several locations. Routing between locations is currently not supported in the process.

  • My warehouse: Main warehouse. If you do not need different warehouses, everything can run through this one main warehouse. It can be renamed. This is the default warehouse if multiple warehouse locations are not needed.

  • Rack bay: Area in the warehouse that serves orientation on the way to the storage bin. Together with the aisle, the rack bay structures warehouse management.

  • Storage bin: Lowest level of the warehouse or location. The information can be stored on the product so that the product can be stored correctly. The storage bin is displayed on delivery and output at picking. Fixed storage bins per product create order and speed in picking.

  • Storage location area: Collective term for the terms aisle and rack bay, which serve orientation.

  • Warehouse: Name of the warehouse: cold storage, timber warehouse, hazardous goods warehouse, warehouse 1, 2, 3. The warehouse name helps manage different warehouse areas with different requirements.

Terms for stock and quantities

The following terms describe stock limits and the different quantities that Scopevisio calculates with in procurement.

  • Available quantity: Quantity of the product that is immediately available for dispatch after deducting the reservations from orders currently in place. This is the quantity that can be promised to customers without exceeding existing stock or depending on future goods receipts. It is calculated as warehouse stock minus reserved quantity and is decisive for the order confirmation.

  • Book stock: Or calculated quantity: The warehouse quantity recorded in the ERP system (enterprise resource planning system), based on documented transactions. The book stock can deviate from the physical stock, for example through shrinkage, theft or recording errors. Regular inventories help identify differences.

  • Delivery quantity: The quantity actually delivered by the supplier, which is recorded at goods receipt. It can deviate from the order quantity (over-delivery or under-delivery). In the ERP, the delivery quantity is compared with the order quantity, and differences are documented. Also called partial quantity.

  • Goods receipt quantity: The quantity that is recorded and documented in the goods receipt process. This is the basis for put-away and later invoice verification. Delivery quantity and goods receipt quantity are mostly the same, or the difference is shrinkage, missing quantities, loss or damage.

  • Maximum stock: Stock that is to be kept in stock of this product at most. Maximum stock minus reorder point is the quantity and value that are ordered regularly. The maximum stock is not exceeded per purchase order, but can be exceeded if there is corresponding demand from orders that are still undercovered. A note then appears that the maximum stock should be checked.

  • Minimum stock: Informational value that does not trigger order proposals.

  • Missing quantities: If your supplier delivers fewer products and/or quantities than documented, a missing quantity or under-delivery arises. This can lead to customer orders that cannot be fulfilled. Missing quantities are documented.

  • Order quantity: The total quantity of an item specified in a purchase order. It is usually specified in the base unit or delivery unit and can deviate from the available quantity. The order quantity is the basis for delivery date calculations and cost calculations.

  • Reorder point: Stock that triggers an order proposal when it is undershot. If the stock at the location falls below this value, the next replenishment planning run (on events and daily) generates an order proposal that replenishes the quantity up to the maximum stock. Reorder point, minimum stock and maximum stock are stored per product and location or storage bin.

  • Required quantity: The total quantity of a product needed for requirement requests, production, sales or customer orders.

  • Reserved quantity: The quantity of a product that is reserved for customer orders or production orders already recorded. It is part of the available stock but is not freely available. In stock, the reserved quantity is shown separately to avoid overbooking.

  • Warehouse stock: The current stock of an item in the warehouse, recorded physically or in the books. This is the basis for all warehouse valuation calculations and availability checks. The warehouse stock is updated by stock receipts and stock withdrawals.

Terms for units and conversions

The following terms describe how Scopevisio manages and converts quantities in different units.

  • Base unit: The base unit of a product is regularly the unit of a product most commonly used in your company. Usually "piece" is stored as the unit. In the product form, the base unit cannot be changed because it is linked to the calculation of the stock price, that is, the price at which a product is valued in quantity with its stock. Scopevisio sets it only as long as the product does not yet have a base unit. The intended way to change it is the conversion Adjust base unit in an order proposal. The base unit is often the smallest unit in which sales are intended, but it can also be consumed in a smaller sub-unit to be determined.

  • Conversion factor: The mathematical factor by which quantities are converted between different units (for example 1 carton = 50 pieces). This factor can be defined per product. The factor must be stored correctly in the ERP.

  • Packaging unit: The quantity of a product contained in a standardized package (for example "6-pack" or "bag of 250 g"). It is often identical to the delivery unit.

  • Pallet unit: The standardized quantity of a product that fits on a pallet and is transported. This is a logistical standard size to maximize transport efficiency. Pallet units are delivery units.

  • Purchase unit: Unit that differs from the base unit for purchasing and can be calculated into base units using a factor. Example: purchase of a pallet of cola bottles, 20 pieces in a crate, 20 crates on the pallet. If the purchase unit is pallet, the base unit can be crate or bottle and the sales unit crate or bottle.

  • Sales unit: Unit that can differ from the base unit for sales. Example: sale in "crate" while the base unit is "bottle".

  • Sub-unit: Unit below the base unit, determined by a factor, that may be 1 level below the base unit, hence sub-unit. This enables finer-structured stock management. This unit cannot be managed directly in orders, but can only be used as a unit in a parts list or in consumption.

  • Units: The calculation for goods is fully implemented, so that a 6-pack can be purchased in a crate or on a pallet, sold as such and sold as a bottle. Units help stock products accordingly without the existence of different container sizes making it necessary to create, manage and stock individual products.

Terms for goods receipt, delivery and returns

The following terms describe how Scopevisio records incoming goods, handles deviations and assigns supplier invoices.

  • Delivery disruption (missing quantity): The quantity that physically arrived deviates from the quantity documented on the delivery note. The delivery note shows more than actually arrived (example: delivery note 22 pieces, arrived 19, missing quantity 3). This is not a partial delivery: in a partial delivery, delivery note and goods receipt match, it is only less than ordered. In a delivery disruption, the goods receipt does not match the delivery note.

  • Full delivery: The delivered quantity equals the order quantity, Σ(goods receipts) = order quantity. The open remaining quantity of the purchase order is reduced to zero, the purchase order is set to the status fully delivered and disappears from the open purchase orders. Recording is typically done "from the purchase order to the goods": transfer the purchase order to delivery, and the system takes over all items and quantities.

  • Goods receipt (incoming delivery): Recording of goods/material after physical inspection against a purchase order using the method: from the purchase order to the goods/material and from the goods/material to the purchase order. The delivery note document serves as the reference entry for processing the supplier's invoice and is therefore a mandatory entry. Entering it correctly here speeds up all subsequent processes. The posting date of the goods receipt must be entered. Take into account when the goods arrived in your area of control. More in the article Goods receipts.

  • Goods receipt inspection: The check of the received products for quantity and quality. The goods receipt inspection is a quality assurance measure that depends on your products and circumstances. Defects are documented and must be clarified with the supplier.

  • Incoming invoice: With a document scan of the supplier's invoice (PDF), the supplier is recognized, identified by features such as name, address and VAT ID (value-added tax identification number) and assigned to the master contact. The delivery note number is read from the document and can be linked to the posted delivery. This enables a factual check, and the assignment to deliveries can be done clearly and quickly. More in the article Incoming invoices.

  • Partial delivery: A single goods receipt covers only part of the order quantity, Σ(goods receipts so far) < order quantity. The difference remains on the purchase order as an open remaining quantity. The purchase order remains in the status partially delivered and open. Further goods receipts can be posted successively to the same purchase order. Each one reduces the remaining quantity further until it reaches zero (then full delivery). A partial delivery is thus not a special case, but the result of several sequential goods receipts against the same purchase order.

  • Put-away: The process of posting inspected products into a storage bin and storing them physically. Put-away is the conclusion of the goods receipt. Faulty put-away leads to inaccurate warehouse stocks.

  • Return: The document to the supplier, for example for a missing quantity or a return shipment. Depending on the occasion, it can be named a debit note, credit note request or notice of defects. There is no separate document type for this. The return posts the warehouse stock back and does not change the incoming invoice. More in the article Returns.

Terms for suppliers and lead times

The following terms describe the supplier and the periods in which the supplier delivers.

  • Delivery and performance: Fulfillment of the contractual agreement made through the purchase order to render the service or delivery. Documentation is important for legal and financial purposes. This is done in the goods receipt.

  • Delivery capability: The ability of a supplier to deliver ordered goods on the agreed date and in the agreed quantity. High delivery capability is necessary for just-in-time deliveries. Low delivery capability requires safety stocks.

  • Delivery period: The committed period in which a supplier performs or delivers the ordered products, often expressed in days (for example "5 working days"). The delivery period often starts only after the order confirmation. A short delivery period enables just-in-time delivery.

  • Late delivery: A delay in delivery beyond the agreed delivery date. A late delivery can have considerable consequences.

  • Lead time: The period from the order until the arrival of the goods. The lead time depends on the supplier, distance and shipping method. Understanding the lead time is essential for replenishment planning. You can set the lead time in days per product supplier.

  • Supplier: A company or person that supplies products to another company. Suppliers are critical partners in the supply chain. A good supplier relationship is essential for stable operations.

Terms for dates

The following terms describe the dates that apply in Scopevisio procurement to purchase orders, deliveries and invoices.

  • Confirmed delivery date: The delivery date confirmed by the supplier in writing or electronically after the order is placed. This is more binding than the initially offered date and replaces the planned date after the order confirmation. Deviations from the confirmed delivery date count as late delivery.

  • Delivery date: The actual or agreed date on which the goods arrive or are to arrive at the recipient. This is the binding date recorded between purchase order and supplier. During the goods receipt check, it is checked whether the actual delivery date matches the agreed one.

  • Delivery date from and delivery date to: Delivery date from is the start and delivery date to is the end of a delivery time window that the supplier specifies or that you specify to your supplier. This enables flexible delivery windows instead of single days and is often used for bulk goods. The system can post the exact delivery day within this window. Together, both dates define a period in which delivery is to take place. This reduces open items and gives both sides more flexibility.

  • Expiry date: The best-before date or expiration date of perishable goods, food or medicines. After this date, the goods may no longer be sold or used. Expiry date management is necessary to minimize wastage and disposal.

  • Invoice date: The issue date of the incoming invoice from the supplier, as stated on the invoice. This date is decisive for calculating cash discount and payment terms.

  • Planned date: The planned or calculated delivery date that the system determines automatically, mostly based on availability and delivery period. It deviates from the requested date if the supplier cannot deliver in the desired time. The planned date is decisive for material planning.

  • Posting date: The date on which a transaction is posted or recorded in the ERP system. It can deviate from the delivery date. It is relevant for financial accounting.

  • Purchase order date: The date on which a purchase order is formally placed or released. This date is important for calculating payment terms and delivery dates. In the ERP, the purchase order date is saved automatically and cannot be changed.

  • Requested date (desired delivery date): The delivery date of goods desired by the purchaser, which they specify at purchasing. This is a non-binding requested date and can deviate from the supplier's delivery capability. The requested date helps with replenishment planning and is the basis for calculating the purchase order date. Desired delivery date is a synonym, merely prepared for communication with your supplier: the point in time at which the purchaser can state when they need the goods. In contrast to the planned date, it is not calculated automatically.

  • Validity date: The period or expiration date in which a quotation, price or discount is valid. After this date, the agreed conditions are no longer valid and must be renegotiated. This is important for long-term agreements.

Terms for inventory and stock differences

The following terms describe the stocktaking in the warehouse.

  • Count: The actual physical recording and documentation of stock during an inventory. The count is manual and error-prone. With barcodes and structuring into storage location areas, the count becomes more precise.

  • Inventory: The periodic stocktaking and counting of products in the warehouse. An inventory is usually carried out annually but can also take place monthly. The result is reconciled with the book stock. More in the article Inventory.

  • Stock difference: The deviation between the stock recorded in the books and the physically counted stock. A stock difference arises from errors, shrinkage or theft. Larger differences require investigation and correction.

Terms for products, product groups and parts lists

The following terms describe how you group and compose products in Scopevisio and which types of stock exist.

  • Auxiliary materials and supplies: Materials that are needed in production but do not become part of the end product (for example lubricants, cleaning agents). This category is often underestimated but is relevant for operating cost accounting. They are often stored in separate warehouses or with less control.

  • Empty containers: Reusable containers such as pallets, packages, crates, boxes, bottles or barrels without contents. Empty containers are sent back to the supplier and reused. Handling empty containers is a separate logistical process.

  • Finished products: Products that are fully manufactured and ready to ship. Finished products are sold directly to customers. They must be available in sufficient quantities to fulfill deliveries promptly.

  • Parts list: Parts lists can be created in several forms and can show, on the one hand, which individual parts a sales product consists of and at what cost. Parts lists can have sub-parts lists and thus represent sequences in the composition of individual products. This is essential for production management and cost accounting. More in the article Parts lists.

  • Product groups: With product groups, several products can be combined. All characteristics stored in the product group are inherited by all products of the assigned product group. They can be refined further at the lower level and overwritten with an individual entry. The values from the product group nevertheless remain visible but not effective, because the individual entry takes precedence. Product groups help speed up product creation, so that new products with identical characteristics can be enriched without entering them anew each time. More in the article Product groups, valuation methods, stock accounts.

  • Raw materials: Materials in raw form that are processed into intermediate or end products in production. Raw materials are simple and not further processed. They form the basis of value creation.

  • Semi-finished products: Products that have already been partially processed but are not yet ready for sale. Semi-finished products are intermediate steps in the production process. They can serve as a buffer between production stages or be used as components for other products.

  • Spare parts: Individual parts that serve to replace defective or worn components. Spare parts must be available quickly and are often sold at a high margin. Good warehouse management of spare parts increases customer satisfaction.

Terms for stock valuation

The following terms describe how Scopevisio calculates the value of your warehouse stock. Details on valuation methods and stock accounts are in the article Product groups, valuation methods, stock accounts.

  • Stock price: Calculated unit price at which a single base unit was procured. The type of calculation depends on the valuation method (average, FIFO, LIFO) for the product or the product group. The calculation starts with the first posted goods delivery. Stock prices for a product with a parts list are summed from the individual components and parts into one stock price of the target item.

  • Stock valuation: The valuation of the warehouse stock at the balance sheet date, usually at cost of acquisition, the stock price. The stock valuation is a critical balance sheet item.

  • Valuation method: The stock price can be valued by different methods: moving average, FIFO, LIFO (Last In, First Out). A valuation method valid for you can be set per product group or for all product groups. The valuation method considerably influences stock accounting and cost accounting.

  • Weighted average price: A valuation method that uses the average stock price as the warehouse valuation. The weighted average price is updated regularly. This method smooths price fluctuations.

Terms for batches and product identification

The following terms describe how you track batches and identify products uniquely.

  • Barcode: A bar code (1D) that encodes product information and is read with a barcode reader. Barcodes enable fast and error-free identification. They are standard in warehouses and supermarkets.

  • Batch (lot): A production lot of identical products manufactured in a continuous process. A batch is managed and quality-controlled as a coherent unit. If defects occur, an entire batch can be recalled. Lot is a synonym for batch, often used in connection with individual components instead of finished products. A lot has the same properties as a batch. The terms are often used interchangeably. More in the article Batches and lots.

  • Batch management: The management system for tracking and controlling production batches. Batch management documents manufacturing, storage and distribution. It is necessary for compliance and quality assurance.

  • Batch number: The unique identification number of a production batch, for example "CH-2024-001". The batch number is noted on every product and enables traceability. It is essential for quality control and recalls.

  • GTIN/EAN: The European Article Number (EAN) or Global Trade Item Number (GTIN), a barcode of up to 13 digits. The GTIN is an international standard for product identification. It is indispensable in sales and logistics.

  • SKU: Stock keeping unit, the company-internal item number in the warehouse management system. The SKU often differs from the GTIN and is company-specific. It is used internally for all warehouse transactions.

Related articles about the procurement glossary

Did this answer your question?