With the inventory module in the Scopevisio Client, you carry out a complete or location-based stocktaking: you create the inventory, count, complete the count and post the differences. You find the module in the ribbon under Procurement → Inventory.
Scopevisio compares the calculated stock with the counted stock and posts differences directly to the product. The module covers the regular key date inventory, the postponed inventory during ongoing operations and the initial inventory when the system is put into operation. The types, options and use cases are described in the article Types, options and use cases of the inventory. This article applies to users who carry out inventories in the Scopevisio Client or in the mobile app Scopevisio 2Go.
Steps: Create, count and post an inventory in Scopevisio
In Scopevisio, an inventory goes through the statuses In preparation, Started, Durchgeführt and Gebucht. The following steps describe the process in the Scopevisio Client:
In the ribbon, open Procurement → Inventory. Scopevisio shows the overview of all created inventories.
Click Create to create a new inventory. The inventory has the status In preparation. To continue an existing inventory that has already been started, select Edit.
Set a Document date and a Plan date for the inventory documents.
Enter the Location and, if needed, restrict it to a Lagerbereich.
If needed, specify whether the calculated quantities are hidden from the counters (option Berechnete Mengen ausblenden, see the article Types, options and use cases of the inventory, section "Blind inventory: hide calculated quantities"). This is only possible as long as the inventory has not been started.
In the card of the items, click Einträge erstellen. Scopevisio creates the entries from the calculated stock of the location or of the Lagerbereich. With Einträge entfernen you remove selected entries again.
Click Start. Scopevisio fixes the entries, and the inventory has the status Started.
Record the counted quantities. You add further entries with Eintrag hinzufügen or by file upload.
Click Abschließen. Scopevisio ends the count, and the inventory has the status Durchgeführt. With Erneut bearbeiten you return to the count.
Click Differenzen buchen. Scopevisio posts the stock differences, and the inventory has the status Gebucht.
The image shows the inventory in Scopevisio in status In preparation: at the top the inventory details with location, document and plan date, below the items with calculated quantity
Important: Scopevisio only posts items with a difference. An inventory without differences cannot be posted.
Scopevisio values the differences at the stock price. The posting of the differences can be carried out organizationally by a different person or department than the count, for example to separate recording and posting.
Tip: Define the inventory period at the beginning to ensure transparent and traceable documentation.
Status of an inventory in Scopevisio
After opening the Inventory menu item, you see an overview of all created inventories. Each inventory has one of the following statuses:
In preparation: The inventory has been created but not yet started.
Started: The inventory is in the counting phase.
Durchgeführt: The count is completed. With Erneut bearbeiten you return to the count.
Gebucht: The stock differences are posted.
Each inventory automatically receives a unique inventory ID. You can use it to trace
on which day the inventory was carried out,
which stocks were recorded,
and which status currently applies.
Reverse an inventory: cancel a posted inventory
With Reverse you cancel a posted inventory again by means of correction postings.
When inventory postings arrive in financial accounting
The Differenzen buchen function posts the stock differences in procurement. The postings reach financial accounting via Procurement → Postings → Posting runs. Only there do you post the inventory postings to financial accounting.
Which account Scopevisio posts for inventory differences
For inventory issues (counted quantity lower than the stock), Scopevisio posts to the expense account if the rule list of the product group contains an entry with the account type Aufwand Konto and the booking type Post outgoing journal entry. If this entry is missing, Scopevisio posts the issue against the stock change account. For inventory receipts, Scopevisio never uses the expense account. The configuration is described in the article "Product groups, valuation methods, stock accounts".
Location and storage area of an inventory in Scopevisio
In Scopevisio, an inventory is always carried out for exactly one location. Within the location, you can additionally restrict the inventory to one Lagerbereich. Scopevisio then counts all storing places in this Lagerbereich. Without a restriction, the inventory covers the whole location.
A prerequisite for restricting to a Lagerbereich is that your products are assigned to storing places and that these storing places have been organised into a Lagerbereich.
Note: An inventory across several locations does not exist. Create a separate inventory for each location.
Carry out an inventory with Scopevisio 2Go
With the mobile app Scopevisio 2Go, you record the products and quantities actually present directly at the storing place.
Create the inventory in the Scopevisio Client and click Start.
Open the inventory in Scopevisio 2Go. It appears there under its sequence number.
Count and save quantities as in the Scopevisio Client.
In Scopevisio 2Go, you can also identify products unambiguously by barcode scan: via the camera of a mobile phone or tablet or via the laser scanner of an MDE device. Counters therefore do not need any product knowledge to tell one product from another. Direct recording in the system prevents incomplete or lost count lists on paper. Scopevisio sets the recording date automatically as soon as the counted quantity is entered. In the postponed inventory, this is the basis for the correct target-actual comparison.
When an inventory cannot be edited as expected
The following cases occur in the inventory process in Scopevisio:
Differenzen buchen is not possible: The cause is that the inventory contains no differences. Scopevisio only posts items with a difference. Check the counted quantities. If there is really no difference, no posting is needed.
The count is to continue after Abschließen: Click Erneut bearbeiten.
Inventory options that cannot be changed and problems with the recording date are covered in the article Types, options and use cases of the inventory.
If the problem persists, ask in the chat for a handover to the support team.
Frequently asked questions about inventory
How do I reverse a posted inventory?
With the Reverse function, you cancel a posted inventory in Scopevisio again by means of correction postings.
Can I create an inventory across several locations?
No, an inventory in Scopevisio always applies to exactly one location. Within the location, you can restrict it to one Lagerbereich.
Where do I find the functions Add entries and Begin inventory?
Functions with these names do not exist in Scopevisio. You start the inventory with Start, and you create the entries in the card of the items with Einträge erstellen. During the count, you add further entries with Eintrag hinzufügen.
Related articles about inventory
Product groups, valuation methods, stock accounts

